Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Flower Mound
Dryer vent cleaning in Flower Mound typically runs $180-$340 for a standard single-vent system, and every job starts with a written price before we touch a tool. We’re the Dryer Vent Cleaning crew from CleanRun, dispatching to Flower Mound from our Dallas-Fort Worth office with background-checked, uniformed technicians who carry Nikro agitation equipment and HEPA-filtered negative-pressure extractors on every truck. Call (682) 297-4068 and we’ll put a written estimate in your hand before we schedule.
Flower Mound’s housing stock is different from what we see in drier inland suburbs. The town’s explosive growth from the mid-1990s through the mid-2000s filled master-planned subdivisions like Wellington, Lakeside, and Stone Hill Farms with large two-story brick homes, most now 20-30 years old with original builder-grade flex duct staged through superheated, lake-humid attic spaces. That specific combination - aged flex duct, elevated humidity from adjacent Grapevine Lake, and attic temperatures that regularly top 140°F in July - creates dryer vent failures we don’t encounter in Southlake or Keller. Lint doesn’t stay fluffy here. It mats.
Why CleanRun Air Duct Cleaning Irving Is Flower Mound’s Preferred Dryer Vent Cleaning Company
We’ve served Flower Mound since adding Denton County to our route schedule, and the pattern is consistent: homeowners who bought between 2015 and 2025 at price points north of $450,000 want documentation, not promises. Our crews deliver a written price before work starts (Haven Standard Clause 1), a photo record of every duct run before and after, and the 365-Day Done Right Promise in writing on every invoice. No manager approval needed. If it’s not right, we make it right.
Flower Mound customers specifically mention the photo record in reviews. They like seeing the damp lint mat we pulled from their attic flex run, or the kinked section at a joist crossing that explained why their dry cycle had stretched past an hour. That documentation habit is why we don’t get callback disputes. The camera doesn’t argue.
Our response time to Flower Mound is typically next-day or second-day, scheduled, not emergency-dispatch. Dryer vent cleaning is a planned maintenance job, and we don’t manufacture urgency. What we do promise: the technician who arrives will be named and background-checked under Haven Standard Clause 3: Verified Crews, and he’ll carry equipment you can look up - Rotobrush, Nikro, Abatement Technologies - not a shop vac with a brush taped to the hose.
Our Dryer Vent Cleaning Services in Flower Mound
Dryer Vent Inspection
Every Flower Mound job starts here. We run a camera through the full vent run, from the transition box behind your dryer to the exterior termination. In the subdivisions along FM 2499 and Long Prairie Road, we regularly find the same failure: a mated kink where 2000s-era flex duct sags across a joist, plus damp lint compaction in the low spot. The camera shows it. You see it. Then we write the scope and the price. No inspection fee is charged separately if you proceed with cleaning; if you decline, the inspection is $89.
Vent Cleaning
Real source removal, not vacuum noise. For Flower Mound’s humid attic runs, we use Nikro agitation tools to break up compacted lint mats, followed by negative-pressure extraction with HEPA filtration. The “negative-pressure” part matters: we seal the vent system and pull air through it, so dislodged debris exits through our collection unit rather than settling in your attic or laundry room. A typical Flower Mound vent cleaning on a single two-story run takes 90-150 minutes because of the access complexity and the state of the lint we find. Thirty-minute jobs are trap cleans, not vent cleans.
Lint Removal
The lint trap catches maybe 60-70% of what your dryer produces. The rest enters the vent run. In Flower Mound’s lake-humid attics, that lint doesn’t dry-float to the exterior. It accumulates at elbows and kinks, absorbs moisture, and compresses into a dense mat that restricts airflow and extends dry cycles. We remove it mechanically. No chemical dissolves compacted lint safely; anyone selling a “lint-dissolving treatment” is selling fiction. Our photo record shows the before and after of the actual removal.
Vent Rerouting
When the original builder-grade flex run has kinked, partially collapsed, or been extended with multiple couplings past code limits, cleaning isn’t enough. We replace the damaged section with rigid metal duct, properly supported, to the exterior wall. Rigid metal handles Flower Mound’s thermal cycling better than flex, won’t sag into a new kink, and gives lint nowhere to accumulate. A reroute in Flower Mound typically adds $140-$280 to the base cleaning price, depending on linear footage and access. We quote it in writing before cutting anything.
Bird Guard Installation
Missing or broken vent caps are common on Flower Mound homes where the original plastic cap has cracked after two decades of UV exposure. A proper bird guard with lint-passage design keeps pests out without creating a new blockage point. We stock guards from Guardsman and Aprilaire that match common Flower Mound exterior colors. Installation runs $65-$120 per cap, quoted upfront.
Vent Cap Replacement
Same principle, simpler scope. If your cap is intact but the flapper is stuck open or the screen is torn, we replace the assembly. An open flapper lets Grapevine Lake humidity straight into your vent terminus, which worsens the damp-lint compaction that already plagues Flower Mound attic runs. It’s a small fix with outsized impact.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Flower Mound
Our trucks carry professional-grade equipment from Nikro, Honeywell, and Abatement Technologies - brands you can verify independently before you agree to a price. Nikro’s agitation tools and HEPA extractors handle the mechanical work. Honeywell and Aprilaire components figure into our vent cap and bird guard inventory. We don’t use consumer-grade shop vacs or unbranded attachments. The equipment list is part of what you pay for, and it’s part of why a real vent cleaning takes longer than a coupon special.
Common Dryer Vent Cleaning Problems We See in Flower Mound Homes
- Damp lint compaction in humid attic runs. Flower Mound’s position adjacent to Grapevine Lake means attic relative humidity stays elevated for months. Lint that would stay fluffy in a drier climate mats into a dense, damp clog behind your dryer wall. The trap is clean. The vent is not.
- Kinked flex duct at joist crossings. In Wellington, Lakeside, and the FM 2499 corridor subdivisions, original builder-grade flex duct installed in the early 2000s has thermally cycled for 20+ years. It kinks and partially collapses at support points. Brush-only cleaning skims right over these deformities. Camera inspection finds them. Agitation tools and section replacement fix them.
- Extended dry cycles misdiagnosed as dryer failure. Homeowners in Stone Hill Farms and similar subdivisions call appliance techs when the real problem is a blocked vent. A $300 dryer repair doesn’t fix a vent restriction. We see this several times per month in Flower Mound. The vent test takes 10 minutes and costs nothing as part of our inspection.
- Missing or degraded vent caps admitting humidity and pests. Broken caps on homes facing Grapevine Lake’s prevailing winds let rain and humid air directly into the terminus. The lint downstream never dries. Bird guards with proper lint clearance solve this without creating a new blockage.
Pricing for Dryer Vent Cleaning in Flower Mound, TX
| Service | Typical Range in Flower Mound |
|---|---|
| Single vent inspection + cleaning, standard access | $180-$260 |
| Two-story or extended run with attic access complexity | $240-$340 |
| Vent reroute with rigid metal replacement section | $140-$280 additional |
| Bird guard or vent cap replacement | $65-$120 each |
| Free Second Opinion on any written competitor estimate | No charge |
What moves you within these ranges: linear footage of duct, number of story changes, condition of existing flex versus rigid, and whether we find damage requiring reroute. We don’t quote per-vent or per-foot. One flat price per system, agreed in writing, before work starts. That’s Haven Standard Clause 1. No exceptions in 52,000+ jobs since 2013.
Estimates are free. Call (682) 297-4068 and we’ll schedule a technician to your Flower Mound home, put a written number in your hand, and let you decide without pressure.
We Also Serve Cities Near Flower Mound
Our crews run regular routes to Flower Mound from the DFW metro office, with scheduled service also available in Southlake, Grapevine, Lewisville, and Keller. Each city gets the same written-price-first protocol and documented photo record. The local conditions differ - Grapevine shares Flower Mound’s lake humidity, while Keller’s older stock has different duct configurations - and we scope accordingly.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Flower Mound
Your vent is restricted, not your dryer. In Flower Mound’s lake-humid attic runs, lint compacts into a damp mat that airflow can’t penetrate, especially at kinked flex sections. The dryer’s heating element still works; it just can’t push exhaust through the blockage. A camera inspection confirms the restriction location. Call (682) 297-4068 for a free estimate - we’ll show you the photo before quoting the fix.
Thirty minutes is a trap clean and a vacuum pass at the vent mouth, not a full source removal. Flower Mound’s humid attic runs with 20-year-old flex duct require camera inspection, agitation tool work, and often section repair or replacement. Real cleaning on these systems runs 90-150 minutes. The photo record at the end shows the difference. Ask your neighbor if they received before-and-after images of the full run.
If your cap is cracked, missing, or has a stuck flapper, yes - and we’ll show you the condition on camera before quoting replacement. A broken cap lets Grapevine Lake humidity straight into the vent, recreating the damp-lint problem within months. Bird guards add $65-$120 and are worth it if you have prior pest intrusion or live near open greenbelt. We don’t bundle them as automatic upsells. Haven Standard Clause 1: written price for exactly what you agree to.
No. A dryer vent is an exhaust pathway, not a supply duct. Any fog applied inside it gets blown out on the next dry cycle or settles as residue on lint that remains. It does not reduce fire risk, improve airflow, or address the damp compaction that’s actually slowing your dryer. Real source removal - mechanical agitation and negative-pressure extraction - is what matters. We don’t sell sanitiser fog on dryer vents. If a competitor includes it in their package, you’re paying for theater.
Camera inspection from transition box to terminus. Written scope and price. Agitation tool work with Nikro equipment to break up compacted lint. HEPA-filtered negative-pressure extraction. Rigid metal replacement of any kinked or collapsed flex sections. Final camera pass to verify clear airflow. Before-and-after photo record delivered as standard. For a typical 2000s two-story in Wellington or Lakeside, expect 90-150 minutes. The cycle-time test on your dryer confirms the fix before we leave.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Flower Mound and the Dallas-Fort Worth metro since 2013.