Air Duct Cleaning in Arlington - One Price Per System, Agreed Before We Start

Air Duct Cleaning in Arlington, TX

Whole-system HVAC cleaning and air quality treatment in Arlington typically runs $450-$1,200 for a single-family home, depending on whether the job addresses standard duct maintenance or includes coil cleaning and sanitizing. Arlington’s housing stock, built almost entirely between 1965 and 1995, puts most local ductwork 30 to 55 years old and routed through unconditioned attics that exceed 150°F for six months of the year. That combination degrades fiberglass duct board and early flex-duct systems faster than almost anywhere in North Texas, which is why we approach Arlington jobs with equipment sized for heavy debris loads and insulation breakdown that newer suburbs rarely see. Call (682) 297-4068 for a written estimate before any work starts.

Call (682) 297-4068

Why Arlington Homes Are Different

Arlington was built out as a bedroom community between Dallas and Fort Worth during the 1965-1995 suburban boom, leaving an unusually dense concentration of slab-on-grade tract homes with ductwork running through unconditioned attics now 30 to 55 years old. With attic temperatures routinely exceeding 150°F through a six-plus-month cooling season, original fiberglass duct board and early flex-duct systems are degrading, sagging, and shedding insulation fibers into the airstream at a rate that outpaces virtually anywhere in the region. In older east-side neighborhoods along Arkansas Lane and Collins Street, our crews regularly find flex-duct runs where the foil jacket has cracked and the fiberglass batting has collapsed inward, partially blocking airflow and shedding glass fibers directly into living spaces. That failure mode is tied almost entirely to decades of extreme Arlington attic heat rather than age alone, and it often requires duct replacement, not just cleaning, to resolve properly.

Arlington’s position on the Blackland Prairie also means brutal summer attic conditions that accelerate flex-duct vapor barrier breakdown and duct board adhesive failure. North Texas ranks among the worst regions nationally for cedar and juniper pollen from December through February and oak pollen in spring, so the allergen load cycling through aging, leaky duct systems here is exceptionally high. Most Arlington homeowners we speak with are managing a combination of degraded duct materials, extreme thermal stress, and heavy seasonal pollen that newer housing stock simply does not face.

Our Main Arlington Services

Arlington homeowners contact us most often for full-system duct cleaning and dryer vent maintenance, though duct repair needs are increasingly common as the housing stock ages.

Air Duct Cleaning in Arlington

Our Arlington duct cleaning jobs address the heavy particulate accumulation typical of 30- to 55-year-old trunk lines, with negative-pressure extraction and rotary brush contact through every register and return. We photograph the inside of every duct run before and after, and we deliver that photo record as part of the standard job file. Crews working Arlington’s older neighborhoods frequently find delaminated duct board and separated flex collars that need repair before cleaning can be effective. Air Duct Cleaning in Arlington includes a written price before any panel comes off.

Dryer Vent Cleaning in Arlington

Dryer vent blockages in Arlington often combine standard lint accumulation with degraded flex-duct materials from attic heat exposure, creating longer run times and fire hazards that lint-only cleaning does not address. We inspect the full vent path from appliance to termination, replace degraded flex with rigid metal where needed, and document the before-and-after airflow improvement. Dryer Vent Cleaning in Arlington is quoted in writing before work begins.

Duct Repair & Sealing in Arlington

Given the thermal degradation patterns we see in Arlington attics, duct repair and sealing is often the necessary precursor to effective cleaning. We replace collapsed flex runs, reseparate duct board trunks at failed joints, and apply mastic sealant to restore system integrity before any cleaning equipment goes in. Duct Repair & Sealing in Arlington carries the same written-price guarantee and photo documentation.

Before

After

HVAC Cleaning in Arlington

Arlington’s cooling-dominant climate and 150°F attic conditions place extraordinary load on evaporator coils and blower assemblies, which work harder and longer than equivalent equipment in milder markets. The combination of heavy pollen loads, degraded duct materials shedding fibers, and extended run times means HVAC components in Arlington homes accumulate debris faster and require more thorough cleaning protocols. Our HVAC Cleaning service addresses this with equipment from Nikro and Abatement Technologies sized for the debris volumes we actually encounter in local systems.

Evaporator Coil Cleaning

Signs you need it

Ice formation on the coil, reduced airflow from registers, or a system that runs continuously without reaching set temperature in Arlington’s summer heat.

What it costs in Arlington

Evaporator coil cleaning typically ranges from $280 to $450 in Arlington, with heavily impacted coils from degraded duct systems at the higher end.

How we do it

We access the coil through the plenum (the main air distribution box), apply foaming cleaner formulated for aluminum fins, rinse with low-pressure water to avoid fin damage, and photograph the coil condition before and after treatment.

Blower Cleaning

Signs you need it

Vibration or noise from the air handler, uneven airflow between rooms, or dust recirculating immediately after filter replacement.

What it costs in Arlington

Blower assembly cleaning runs $220 to $380 in Arlington, depending on whether the motor requires removal for proper access.

How we do it

We remove the blower housing, clean the squirrel cage and motor housing with compressed air and contact solvent, balance the assembly on reinstallation, and document the debris volume removed.

What HVAC Cleaning Costs in Arlington

Why does my Arlington home need HVAC cleaning more often than my parents’ house in Michigan?

Arlington’s 150°F attic temperatures and six-month cooling season force your system to run roughly twice as many annual hours as equivalent equipment in cooler climates, while Blackland Prairie pollen and degraded duct materials add debris faster. Call (682) 297-4068 for a written estimate on your specific system.

Can HVAC cleaning fix the hot rooms in my Arlington house?

It can if the temperature imbalance stems from restricted airflow at a dirty coil or blower, but collapsed flex ducts from attic heat degradation require duct repair, not cleaning alone. We diagnose the root cause with a camera inspection before quoting any work.

Air Quality & Sanitizing in Arlington

Arlington’s aging duct infrastructure and extreme seasonal pollen create conditions where microbial growth and persistent odors take hold in ways that standard cleaning does not address. The same attic heat that degrades flex ducts also creates condensation points at uninsulated trunk connections, particularly in the humid shoulder seasons, which can support mold growth in the plenum and first few feet of duct runs. Our Air Quality & Sanitizing service treats these conditions with EPA-registered products applied through professional-grade equipment, documented with before-and-after photo records.

Mold Treatment

Signs you need it

Musty odor when the system first cycles on, visible dark staining at registers, or respiratory symptoms that worsen when the AC runs during Arlington’s humid spring and fall.

What it costs in Arlington

Localized mold treatment runs $340 to $520 in Arlington; full-system application with access to all trunk lines ranges from $580 to $850.

How we do it

We apply an EPA-registered fungistatic treatment through a fogging manifold into the plenum and each duct run, allow proper dwell time, then extract residual moisture with negative-pressure equipment and photograph every treated surface.

UV Light Installation

Signs you need it

Recurring microbial growth after professional cleaning, or a system in a shaded Arlington lot with limited natural UV exposure at the outdoor unit.

What it costs in Arlington

UV-C lamp installation at the coil or plenum typically ranges from $380 to $620 in Arlington, including the Honeywell or Aprilaire fixture and first-year lamp.

How we do it

We mount the UV fixture downstream of the evaporator coil with a sight glass for lamp inspection, wire to the air handler’s 24-volt terminal, and provide replacement scheduling based on manufacturer hour ratings.

What Air Quality & Sanitizing Costs in Arlington

Is mold treatment in Arlington ducts just spraying bleach?

No, we use EPA-registered fungistatic products formulated for HVAC application, applied through controlled fogging equipment with documented dwell times and extraction protocols that household bleach cannot replicate safely. Call (682) 297-4068 for a written scope and price.

Will UV lights actually help with Arlington’s pollen problem?

UV-C lamps target microbial growth on wet coil surfaces, not airborne pollen; for pollen reduction we typically pair UV installation with upgraded filtration, which we can evaluate during the same visit.

Brands We Service in Arlington

We stock parts and service equipment from Honeywell, Aprilaire, Nikro, and Abatement Technologies, with common filters, UV lamps, and sanitizing agents carried on Arlington trucks for same-visit completion. Our brands page lists full manufacturer specifications for independent verification.

Pricing for Air Duct Cleaning in Arlington, TX

Neighborhoods We Serve in Arlington

CleanRun crews work across Arlington’s full residential footprint, from the older east-side tracts near Arkansas Lane and Collins Street to newer developments in southwest Arlington. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with Arlington crews typically arriving within the scheduled window.

• East Arlington / Dalworthington Gardens area
• Central Arlington near UT Arlington
• Southwest Arlington subdivisions
• Pantego and surrounding tracts
• North Arlington near I-30 corridor

Service Area - Cities Near Arlington

Our crews serve the full Dallas-Fort Worth metro from the same dispatch base, with regular appointments in Mansfield, TX to the south, Grand Prairie, TX to the east, Haltom City, TX to the north, and North Richland Hills, TX to the northeast. Each city receives the same written-price protocol and documented photo record standard.

FAQs About Air Duct Cleaning in Arlington