Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Duct Cleaning in Irving: What to Know First
CleanRun Duct Repair & Cleaning provides independent Abatement Technologies air duct cleaning in Irving, with most residential systems completed in a single scheduled visit and a written price delivered before any panel comes off. We charge $340-$580 for a typical single-system Abatement Technologies residential cleaning in Irving, depending on duct run count and whether the plenum requires separate access. We’re not affiliated with Abatement Technologies - we operate as an independent service provider - and we’ve maintained a documented photo record on every job since 2013. This page is for Irving homeowners who own Abatement Technologies air filtration or HVAC accessories and need their ductwork cleaned without the coupon-game pricing that dominates this market. Call (682) 297-4068 and you’ll reach a live person, or keep reading for what actually happens inside these systems.
How Abatement Technologies Products Fail - and How We Fix Them
- HEPA-AIRE portable units with clogged pre-filters: The PAS2400 and PAS5000 series use dense pre-filtration that loads quickly in Irving’s spring pollen surge. When the pre-filter cakes, airflow drops and the negative-pressure extraction (vacuum suction that pulls debris from ducts) becomes ineffective. We photograph the filter loading, replace with OEM or Guardsman-verified equivalents, and log the pressure differential before and after.
- AIRE GUARDIAN containment units with compromised duct seals: The AG5000 and AG8000 lines rely on flexible duct connections that fatigue at the clamp points, especially in Irving’s attic installations where summer heat cycles the material. We find collapsed flex sections at the first elbow near the unit, document with pre-cleaning photos, and replace with reinforced ducting rated for Texas attic temperatures.
- PREDATOR 750 and 1200 series with fouled blower assemblies: These high-CFM units move enough air to strip loose duct liner over time. The blower wheel accumulates debris that throws the assembly off balance, causing vibration that cracks the plenum (the main distribution box) at the seam. We pull the blower, clean and inspect the wheel, and photograph the plenum interior before any sealing work.
- Abatement Technologies HEPA filtration retrofits with bypass leakage: When added to existing Irving systems, the filter housing sometimes mates poorly with non-Abatement Technologies cabinets - particularly Carrier and Trane units common in Las Colinas builds from 2015-2020. We measure bypass with a smoke pencil, document the gap, and fabricate a sealed transition rather than forcing a fit that voids the host system’s warranty.
- Negative air machines with worn brush contact: The Rotobrush-compatible shafts on Abatement Technologies negative air systems lose bristle stiffness after roughly 150-200 residential runs. We track brush wear by series and replace with Nikro or Rotobrush OEM brushes before the reduced contact leaves debris at the duct run walls - the photo record shows the difference.
Our Abatement Technologies Air Duct Cleaning Process
- 1
Written price delivered first. Haven Standard Clause 1: we inspect the accessible system, identify the Abatement Technologies equipment series, and provide a fixed written price before any work begins. No exceptions.
- 2
Video inspection and photo baseline. We feed a camera through every accessible duct run, photograph the plenum, and document filter condition. Tomas Reyes pulls these inspection photos before any cleaning starts - “The photo doesn’t lie - let’s look at it together before we talk about next steps.”
- 3
Equipment-matched cleaning protocol. Abatement Technologies negative-pressure systems get brush agitation calibrated to their CFM rating; HEPA-AIRE units get pre-filter service as part of the standard scope, not an add-on.
- 4
OEM or verified aftermarket parts. We stock Guardsman and Honeywell filtration components compatible with Abatement Technologies housings. If an OEM part is back-ordered, we document the substitute’s specifications in writing.
- 5
Post-cleaning verification and photo record. Every duct run is re-photographed, pressure readings are logged, and the customer receives the complete photo record as a standard deliverable - not an upsell.
- 6
365-Day Done Right Promise activated. The written guarantee goes into the job record. If airflow, odor, or visible debris returns, we make it right.
BeforeAfterWhat Abatement Technologies Air Duct Cleaning Costs in Irving
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Single-system residential cleaning (Abatement Technologies HEPA-AIRE or compatible) | $340-$480 | Duct run count, plenum access difficulty, filter replacement needed |
| Negative air system cleaning with blower service (PAS2400-PAS5000) | $420-$580 | Blower removal required, flex duct replacement, attic access |
| Commercial-grade unit (AG5000/AG8000 or Predator series) | $520-$780 | Containment setup, multiple access points, after-hours scheduling |
| Video inspection with written scope only | $0 | Free - applies to written estimate, no obligation |
Irving’s harder water and longer cooling season mean more mineral dust and biological growth in ductwork than northern markets. That doesn’t justify a higher price - it justifies a more thorough cleaning. We price by system, not by vent count, so a 12-run system and a 16-run system in the same Valley Ranch or Las Colinas home fall in the same range if the plenum configuration is standard. Bring any competitor’s written estimate; under Haven Standard Clause 2, we’ll deliver our fixed price next to it at no cost. Call (682) 297-4068 for an exact quote - estimates are free.
Why Irving Homeowners Call CleanRun Duct Repair & Cleaning for Abatement Technologies Work
We’ve served over 52,000 homes since 2013, every one with a written price before work started and a documented photo record when the crew left. The 365-Day Done Right Promise is backed in writing on every job, not just stated in marketing copy. Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews, and they arrive identified by name.
We also service Lennox, Trane, and Carrier systems - common in Irving’s newer construction - so when an Abatement Technologies retrofit interfaces with a host system from another brand, we don’t guess at the compatibility. The photo record, the written scope, and the written warranty are concrete deliverables you can review before paying. That’s the difference between a documented job and vacuum noise.
FAQs
No - professional air duct cleaning performed by a qualified technician does not void Abatement Technologies equipment warranties. We document our methods and any parts used, and we avoid practices that could trigger warranty disputes, such as forcing incompatible filter housings onto Abatement Technologies cabinets. If your system is under warranty, we’ll note the coverage in the written scope before starting. Call (682) 297-4068 if you’d like us to review your warranty documents during the estimate.
You receive a documented photo record of every duct run, before and after, as a standard deliverable - not an optional add-on. The photo record is included on every visit under Haven Standard Clause 4. If a company won’t show you the inside of your ducts, they didn’t clean them. Call (682) 297-4068 and we’ll explain what the camera typically finds in Irving homes.
Most Abatement Technologies negative air and HEPA filtration units are worth repairing if the housing is intact and replacement parts remain available. We recommend replacement when the blower motor has seized, the plenum is cracked beyond sealing, or repair costs exceed 60% of a comparable new unit. We put both numbers in writing - repair scope and replacement estimate - so you can decide without pressure. Call (682) 297-4068 for a free second opinion on any written estimate.
A typical single-system residential cleaning takes 3-5 hours, including setup, inspection, cleaning, and documentation. Commercial-grade Abatement Technologies units or systems with multiple access points in attics or crawl spaces may extend to a full day. We schedule by the job, not by the hour, so the crew isn’t rushing to hit a quota. Call (682) 297-4068 to schedule at a time that works for you.
Every 3-5 years for typical Irving residences, sooner if you have pets, recent renovation dust, or occupants with respiratory sensitivity. Irving’s longer cooling season and occasional Saharan dust events can accelerate buildup in return ducts. We date-stamp the photo record so you have a baseline for the next decision. Call (682) 297-4068 and we’ll assess your current condition at no charge.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Irving at CleanRun Air Duct Cleaning Irving, serving Irving and nearby areas.