Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterRotobrush Air Quality & Sanitizing in Irving: What to Know First
We provide independent Rotobrush air quality and sanitizing service to homeowners across Irving, including the Las Colinas corridor and Valley Ranch, with written pricing delivered before any work begins and a documented photo record of every duct run completed. Most Rotobrush sanitizing and mold treatment jobs are scheduled within a few business days, and we carry common Rotobrush-compatible treatment agents and UV hardware on our trucks. Our flat-rate pricing for a whole-system Rotobrush air quality service in Irving typically runs $340-$620 depending on system size and contamination level - no per-vent add-ons, no surprise charges once we’re on site.
This page is for Irving homeowners who already own a Rotobrush air duct cleaning system or have had Rotobrush service performed in their home and now need mold treatment, bacteria sanitizing, odor removal, UV light installation, or allergen reduction. If you’re seeing musty airflow, persistent odors after cleaning, or suspect microbial growth in your ductwork, we can inspect it and show you what’s actually there. Call (682) 297-4068 for a free estimate.
How Rotobrush Products Fail - and How We Fix Them
- Rotobrush BrushBeast and BrushBeast 2.0 units leave behind damp debris that promotes mold growth. These models use a wet-dry vacuum approach that can deposit moisture at duct elbows and low points, especially in Irving’s humid spring and fall seasons. We treat the affected duct runs with an EPA-registered mold inhibitor after negative-pressure extraction, then install a UV-C lamp at the plenum to prevent recurrence.
- Rotobrush aiR+ and aiR+ XP units have undersized HEPA filtration that passes fine particulates back into the living space. The stock filter media on these residential units is rated for particles down to 0.3 microns but loads quickly in dusty Irving conditions, particularly in homes near the Trinity River floodplain with higher ambient silts. We upgrade the filtration path with Aprilaire 213 media or install a standalone Honeywell F100 whole-house media cleaner downstream of the unit.
- The Rotobrush duct mask seal degrades, creating cross-contamination between supply and return sides during sanitizing. On older Rotobrush units, the flexible mask gasket hardens after repeated heat cycling in Texas attics. We replace it with a Guardsman-compatible silicone seal and verify isolation with a smoke pencil before applying any antimicrobial - Haven Standard Clause 2: Containment Verified.
- Rotobrush whip assemblies fracture in the aiR+ series, leaving broken segments inside ductwork that harbor bacteria. The nylon whip fingers on these units fatigue after roughly 150-200 runs in Irving’s hard duct systems, particularly the galvanized spiral common in 1980s Las Colinas builds. We extract the fragments with a Nikro pneumatic skipper and camera-verify the run before sanitizing.
- Rotobrush motor housings on pre-2019 units develop condensation channels that drip into duct liner. The aluminum motor shroud on early BrushBeast models sweats when attic temperatures drop below the dew point, which happens regularly in Irving’s March and October shoulder seasons. We insulate the housing with Abatement Technologies fire-rated wrap and treat any water-stained duct liner with a borate-based mold treatment.
Our Rotobrush Air Quality & Sanitizing Process
- 1
Written estimate delivered on arrival. We inspect the Rotobrush unit model, ductwork configuration, and accessible plenum with a borescope camera. The photo doesn’t lie - let’s look at it together before we talk about next steps. Price is fixed before any panel comes off.
- 2
Containment and isolation. We seal registers, verify duct mask integrity, and establish negative pressure with a Nikro portable HEPA collector to prevent cross-contamination during treatment.
- 3
Mechanical extraction of debris and moisture. Using Rotobrush-compatible whip assemblies or pneumatic skippering where appropriate, we remove the source material that feeds microbial growth. Every run is photographed before and after.
- 4
Application of treatment agent. For mold or bacteria, we apply an EPA-registered sanitizer (typically a quaternary ammonium or hydrogen peroxide-based product, selected for your specific duct liner material) with a compressed-air fogger, then dwell per manufacturer spec.
- 5
UV or filtration upgrade if indicated. For persistent issues, we install a Honeywell UV100E or Aprilaire 1910 in the plenum, wired to the blower circuit for automatic operation. OEM-compatible brackets used; no warranty voided.
- 6
Final test, photo record delivery, and written guarantee. We verify airflow balance, deliver your Documented Photo Record via email, and leave the 365-Day Done Right Promise in writing. Haven Standard Clause 5: Accountable Completion.
BeforeAfterWhat Rotobrush Air Quality & Sanitizing Costs in Irving
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Mold or bacteria sanitizing, whole system | $340-$480 | Number of duct runs, accessibility of plenum, severity of contamination |
| Odor removal with ozone or hydroxyl treatment | $280-$420 | Source location, need for multiple treatment cycles, duct material type |
| UV-C lamp installation (Honeywell or Aprilaire) | $380-$620 | Lamp wattage, single vs. dual-bulb, electrical routing to blower |
| Air purifier install (whole-house media) | $450-$780 | Return-air plenum modification, filter rack size, MERV rating selected |
| Allergen reduction package (extraction + HEPA upgrade) | $520-$740 | Existing filtration state, pet dander load, pollen season timing |
These are whole-system prices agreed in writing before work starts. We do not quote per-vent or advertise teaser rates that balloon on arrival. The only add-on we encounter regularly is collapsed flex duct repair, which we price separately if the camera finds it. Call (682) 297-4068 for an exact quote - estimates are free.
Why Irving Homeowners Call CleanRun Duct Cleaning Irving for Rotobrush Work
We’ve been running service calls in Irving since 2013, and Tomas Reyes has handled Rotobrush systems specifically across the Las Colinas corridor, Valley Ranch, and the older ranch-style homes south of Airport Freeway. Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. Every job carries the 365-Day Done Right Promise in writing, and our equipment roster includes Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - brands you can verify independently.
We also service Lennox, Trane, and Carrier air quality systems, so if your Rotobrush unit is integrated with a mixed-brand HVAC setup, we don’t need to call in a second contractor. The photo record is included on every visit, not sold as an upgrade. That’s been our practice since the first job in 2013.
FAQs
No, provided the treatment is applied by a qualified technician using EPA-registered products and OEM-compatible hardware. As an independent Rotobrush service provider, we document every product lot number and installation detail so warranty claims remain valid if you need them. Call (682) 297-4068 if you’d like us to review your specific Rotobrush model and warranty status.
Yes, for most units going back to the original BrushBeast series. We stock quality aftermarket seals, whip assemblies, and motor mounts that meet or exceed OEM specs, and we source through Abatement Technologies and Guardsman distribution when factory parts are discontinued. For the rare obsolete component, we’ll tell you during the estimate and price the workaround in writing.
Replace if the motor housing is cracked, the vacuum impeller is worn beyond spec, or repair parts exceed 60% of replacement cost - we measure this during inspection and show you the numbers. Sanitize and restore if the mechanical components are sound but you’re seeing microbial growth, odors, or allergen breakthrough. The camera footage makes this decision obvious.
Typically within two to four business days for standard sanitizing and UV installs. We don’t maintain artificial urgency or “limited slots” - we answer calls live and schedule based on actual crew availability. Emergency mold concerns get priority when health-compromised residents are involved.
The $79-$129 coupon model usually covers a cursory vacuuming and a spritz of deodorizer, not EPA-registered sanitizing with documented before-and-after photos. We’ve opened ducts after these visits and found the original contamination still present. Our price includes the full extraction, verified treatment application, photo record, and written guarantee. Bring us a competitor’s written estimate and we’ll provide a free second opinion under Haven Standard Clause 4.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Irving at CleanRun Air Duct Cleaning Irving, serving Irving and nearby areas.